The generator requires approximately 70A to begin cranking the engine. The current will quickly drop off to approximately 20A.
Most commonly this is due to the engine being over filled with oil. If the oil level is correct then it is possible that the intake air filter could have oil on it. In that case the air filter will...
No, DEWALT generators offer "Voltage Compensation" control scheme on our generators because we have brushless alternators. Automatic Voltage Regulators (AVR) are used on brushed type alternators, w...
The manuals for the Honda Motor on the DEWALT Generators, Pressure Washers and Compressors are attached, see the chart listed below for information on the specific manual required for your equipmen...
You can use service part number 5140021-99 in order to get the bolts, nuts and washers that you are looking for. For information on how to order this .
The oil level on your generator may be low. Our DEWALT generators have a low oil shut off feature. Make sure the generator is sitting on a level surface when running; if your generator is not sitti...
See the chart listed below for the surge watt rating of our generators. Catalog # Surge Watts DG2900 8500 Watts DG3000 9150 Watts DG4300 12,000 Watts DG4400B 15,600 Watts DG6000 13,6...
120 Volt Receptacles WATTS 25 FEET 50 FEET 100 FEET 2500-3750 16 gauge 14 gauge 12 gauge 4000-6500 14 gauge 12 gauge 10 gauge 7000-10000 12 gauge 10 gauge 8 gauge 240 Volt Receptacles WATTS 25 FEET...
For generator storage, you must either drain the gas tank and carburetor bowl, or add a gas stabilizer such as Sta-bil to the fuel. Once a month the generator should be started and run for 10 minut...
Many of the below symptoms can be remedied by the end user. For those that require service by an authorized engine dealer, please visit the link at the bottom of this page For instances where the ...